Raybestos EHT™ Enhanced Hybrid Technology formulations provides the best attributes of both ceramic and semi-metallic, all in one pad. Drivers looking for top-of-the-line braking technology with unprecedented braking control and stopping power, should look no further than EHT formulations.
Features & Benefits:
- Increased stopping power during aggressive braking
- Improved pad wear and durability
- Five layered shims promote quiet stopping in a wide variety of temperature ranges
- Abutment clips, piston clips, spreader springs and anti-rattle clips included where applicable
- Road tests show 20-25% improved stopping power, reduced noice and 35% wear reduction
Installation Tips
- Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
- Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
- Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
- Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
- After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
Attention California Customers - Warning: This product can expose you to chemicals including silica, which is known to the state of California to cause cancer, and lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Alternate/OEM Part Number(s)
OEM / Interchange Numbers: 34216763043, 34216763044, 34216784135, 34216868497
Warranty Information
Warranty Information:Limited Lifetime. Warranty covers defects in materials and workmanship. Normal/uneven wear is not covered
CAPA CERTIFIED or NSF CERTIFIED
CAPA Certified or NSF Certified parts bear the seal of independent, third party organizations guaranteeing fitment and quality equal to original equipment. These parts may be required if your insurance company is paying for the repair.
| Specifications |
| Friction Material |
Hybrid |
| Pad Assembly Thickness, Inner Overall (IN) |
0.201 |
| Pad Assembly Thickness, Outer Overall (IN) |
0.201 |
| Plate Height, Inner (IN) |
2.290 |
| Plate Height, Outer (IN) |
2.290 |
| Plate Length, Inner (IN) |
4.800 |
| Plate Length, Outer (IN) |
4.800 |
