FVP 12034124

Product Details Attribute

Features & Benefits:
FVP Premium Rotor with advanced metallurgy that greatly reduces pad squeal. Added Molybdenum and Chromium to resist rotor cracking.
Installation Tips

Always replace Brake Pads and inspect Calipers and Brake Hoses when installing new rotors

Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose

After removing the old rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration

Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads

Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads

Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow

After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function

Helpful Tools: Allen Wrench | Brake Bleeder Kit | Brake Bleeder Wrench | Brake Cleaner | Brake Fluid Tester | Breaker Bar | Socket Set | Torque Wrench

Attention California Customers - https://www.p65warnings.ca.gov/

Attention California Customers - WARNING: Cancer and Reproductive Harm

Alternate/OEM Part Number(s)

{Alternate Inventory Numbers: 120-34124}

Warranty Information

Warranty Information:Limited Lifetime

CAPA CERTIFIED or NSF CERTIFIED

CAPA Certified or NSF Certified parts bear the seal of independent, third party organizations guaranteeing fitment and quality equal to original equipment. These parts may be required if your insurance company is paying for the repair.

Specifications
Outside Diameter (IN)	13.701
Outside Diameter (MM)	348
Hat Finish	Painted
Solid Or Vented Type Rotor	Vented
Stud/Lug Hole Quantity	5
Surface Type	Smooth
Discard Thickness (IN)	1.118
Discard Thickness (MM)	28.400
Nominal Thickness (IN)	1.181
Nominal Thickness (MM)	30
Center Hole Diameter (MM)	75
Overall Height (MM)	66.500
Abs Tone Ring Included	No
Mounting Bolt Hole Circle Diameter (IN)	4.724
Mounting Bolt Hole Circle Diameter (MM)	120
Overall Height (IN)	2.618
Disc Mounting	Floating
Center Hole Diameter (IN)	2.953
Hat ID (IN)	7.350
Hat ID (MM)	186.700
Bearings Included	No
Stud/Lug Hole Diameter (IN)	0.654
Stud/Lug Hole Diameter (MM)	16.600