Features & Benefits:
- Formulated for high temperature fade resistance, longer wear, and long rotor life
- 100% shimmed
- Post cured for consistent performance throughout the service life of the brake pad
- Precision cut, or shaved backing plates ensure proper fit in the caliper body
- O.E. style gas slots and chamfers optimize braking performance, especially in repeat stop situations
- Hardware included, where applicable
Organic vs. Ceramic vs. Semi-Metallic - What Is The Difference?
A common question many drivers have when shopping for brake pads is “What is the difference between the different brake pad materials?” While all brake pads will stop your vehicle, there are pros and cons of each pad material:
| Brake Pad Material |
Cost |
Dust Level |
Noise Level |
Stopping Power |
Pad Life |
Organic
|
$ |
|
|
 |
 |
Semi-Metallic
|
$$ |
|
|
|
|
Ceramic
|
$$$ |
|
|
|
|
Installation Tips
- Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
- Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
- Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
- Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
- After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
Attention California Customers - https://www.p65warnings.ca.gov/
Attention California Customers - WARNING: Cancer and Reproductive Harm
Alternate/OEM Part Number(s)
{Alternate Inventory Numbers: 300.16100}
Warranty Information
CENTRIC Warranty Information:90 days/3,000 miles
CAPA CERTIFIED or NSF CERTIFIED
CAPA Certified or NSF Certified parts bear the seal of independent, third party organizations guaranteeing fitment and quality equal to original equipment. These parts may be required if your insurance company is paying for the repair.
| Specifications |
| Friction Material Composition |
Semi-Metallic |
| Mounting Hardware Included |
Yes |
| Pad Shims Included |
Yes |
| Pad Wear Sensor Included |
No |
| Friction Material Bonding Type |
Integrally Molded |
| Prepared For Pad Wear Sensor |
Yes |
| Pad Quantity |
4 |
| Inner Pad Height (IN) |
2.248 |
| Inner Pad Height (MM) |
57.100 |
| Inner Pad Width (IN) |
4.850 |
| Inner Pad Width (MM) |
123.200 |
| Outer Pad Height (IN) |
2.220 |
| Outer Pad Height (MM) |
56.400 |
| Outer Pad Width (IN) |
4.850 |
| Outer Pad Width (MM) |
123.200 |
