Suspensia is a premier manufacturer and distributor of OE or better quality chassis parts in the North American aftermarket. All Suspensia chassis parts are direct OE fit, OE look and manufactured in one of the largest OE manufacturing facilities with fully automated assembly lines in Turkey. Suspensia's manufacturing facility is IATF 16949:2016, ISO 9001:201, ISO14001:2015, and ISO45000:2018 certified.
Features & Benefits:
- Manufactured to be exact-fit as a result of thorough development and verification.
- Built to meet or exceed OE Performance using advanced robotic welding and assembly.
- Corrosion resistant finish helps protect from harsh weather and road conditions.
- Bushings are engineered to yield high durability while maintaining proper ride and feel.
Sway Bar Bushing diameter can be within 1mm of your Sway Bar diameter. The clamping force of the bracket will account for the variance.
How To Determine Stabilizer (Sway) Bar Diameter
To determine Stabilizer (Sway) Bar diameter, measure the bar next to the bushing (toward the center of the vehicle), utilizing one of the methods below.
- Use a digital caliper or micrometer for a precise reading
- Use an open end wrench that fits snug around the bar, or tighten an adjustable wrench around the bar, and then measure the span opening
- Wrap a piece of non-stretchable tape (like masking tape) around the bar to get the circumference. Circumference divided by Pi (3.14) = Diameter. In the example below, the tape measured 3 5/8". 3 5/8 = 29/8 = 3.63 inches. Diameter = 3.63/3.14 = 1.15 inches.
Attention California Customers - WARNING: This product can expose you to chemicals including carbon black, methyl isobutyl ketone, ethylbenzene, and formaldehyde which are known to the State of California to cause cancer and toluene which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Alternate/OEM Part Number(s)
OEM / Interchange Numbers: 33556775448
Warranty Information
SUSPENSIA Warranty Information:2 Years / 60,000 Miles (Non-Transferable)
CAPA CERTIFIED or NSF CERTIFIED
CAPA Certified or NSF Certified parts bear the seal of independent, third party organizations guaranteeing fitment and quality equal to original equipment. These parts may be required if your insurance company is paying for the repair.
| Specifications |
| Material |
Rubber |
