CENTRIC 90934567

Centric OE Pack Brake Kits are intended for drivers seeking premium direct-replacement parts that offer low dust, low noise, improved service life and improved braking performance. Each kit contains Centric's Black or High Carbon Alloy rotors and Posi Quiet pads. Features & Benefits:

• Rotors feature a double disc ground, taper free finish which eliminates run out and provides near perfect disc thickness variation (DTV)
• Symmetric rotor vane casting provides proper heat transfer and thermal efficiency, resulting in superior braking power and safety
• Pads are 100% shimmed to eliminate noise and vibration
• Pads provide stable friction performance across a wide temperature range
• Hardware included, where applicable

Installation Tips

• Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
• Before installing the rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
• Apply brake lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
• Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
• Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
• After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function

CENTRIC High Carbon Alloy Info Rear; 330mm Rear Disc; M Sports Package; Single Piston Rear Caliper CENTRIC Posi-Quiet; Ceramic; Includes Hardware Info Rear; Base Brakes Quantity Components that come in this kit 2 Rotor CENTRIC 1 Brake Pad CENTRIC

CENTRIC Warranty Information:90 days/3,000 miles

CAPA Certified or NSF Certified parts bear the seal of independent, third party organizations guaranteeing fitment and quality equal to original equipment. These parts may be required if your insurance company is paying for the repair.