AUTO EXTRA AX900774P

Installation Tips

Always replace Brake Pads and inspect Calipers and Brake Hoses when installing new rotors
Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
After removing the old rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function

Alternate/OEM Part Number(s)

{Alternate Inventory Numbers: AX900774P:8}

Warranty Information

Closeout Inventory Warranty Information:Wholesaler Closeout items have a 30 day warranty (but still are covered by our Return Policy).AUTO EXTRA Regular Inventory Warranty Information:30 days

CAPA CERTIFIED or NSF CERTIFIED

CAPA Certified or NSF Certified parts bear the seal of independent, third party organizations guaranteeing fitment and quality equal to original equipment. These parts may be required if your insurance company is paying for the repair.

Specifications
Slotted	No
Material	Cast Iron
Construction	Full Cast
Outside Diameter (IN)	11.81
Outside Diameter (MM)	300
Directional or Non-Directional Brake Surface	Non-Directional
Rust Resistant Coating	Yes
Solid Or Vented Type Rotor	Vented
Discard Thickness (IN)	0.72
Discard Thickness (MM)	18.4
Nominal Thickness (IN)	0.79
Nominal Thickness (MM)	20
Center Hole Diameter (MM)	75
Overall Height (MM)	66.2
Abs Tone Ring Included	No
Mounting Bolt Hole Circle Diameter (IN)	4.72
Mounting Bolt Hole Circle Diameter (MM)	120
Overall Height (IN)	2.61
Mounting Bolt Hole Quantity	5
Center Hole Diameter (IN)	2.95
Conventional Or Drum-In-Hat Type Rotor	Drum-in-Hat
Cross Drilled	No
Mounting Bolt Hole Diameter (IN)	0.57
Mounting Bolt Hole Diameter (MM)	14.6