R1 CONCEPTS WGTH131060

This R1 Brake Kit is designed for drivers seeking increased brake performance over OE. Features:

Cross-Drilled and Diamond Slotted rotors provide the maximum benefits in stopping power, durability, and performance
Silver Zinc Plated Coating protects against corrosion which leads to better appearance, longer life, and overall improved maintenance and replacement costs
Premium ceramic brake pads are formulated for low dust and noise with Original Equipment performance just for European Applications
Rubber coated steel shims improve NVH (Noise, Vibration, and Harshness) characteristics
Brake pad underlayer minimizes heat transfer from the pad to the caliper, reducing the possibility of fluid boil
Included hardware reduces noise/vibration and prevents premature pad wear

Installation Tips

Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
Before installing the rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
Apply brake lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function

Videos

Product Highlight: R1 eLINE Series Drilled & Slotted Rotors

R1 CONCEPTS eLINE Series; Silver Drilled and Slotted Info

Flag indicates this part fits vehicles sold in the USA. It does not indicate where the part was made -- manufacturers produce parts in multiple factories worldwide.

Flag indicates this part fits vehicles sold in Canada. It does not indicate where the part was made -- manufacturers produce parts in multiple factories worldwide.

Flag indicates this part fits vehicles sold in Mexico. It does not indicate where the part was made -- manufacturers produce parts in multiple factories worldwide.

Rear Left; 535i Base Model

R1 CONCEPTS eLINE Series; Silver Drilled and Slotted Info

Rear Right; 535i Base Model

R1 CONCEPTS Info

DYNAMIC FRICTION Info

Rear; 535i Base Model

Quantity

Components that come in this kit

Rotor

Rotor

Brake Pad

Disc Brake Hardware Kit

Attention California Customers - California Prop 65- This product contains Antimony Oxide and other chemicals which is known in the State of California to cause cancer ( or reproductive problems).

Warranty Information

R1 CONCEPTS Warranty Information:12 months/12,000 miles

CAPA CERTIFIED or NSF CERTIFIED

CAPA Certified or NSF Certified parts bear the seal of independent, third party organizations guaranteeing fitment and quality equal to original equipment. These parts may be required if your insurance company is paying for the repair.