DYNAMIC FRICTION 1310069200

Product Details Attribute

Features & Benefits:

Stable friction performance across a wide temperature range for excellent fade resistance

Rubber-Steel-Rubber shim reduces noise, vibration and harshness

Positive mold to ensure consistent material density

Post-cured to eliminate friction material impurities

Scorched to minimize initial break-in time

Chamfered to reduce noise when braking

Slotted to dissipate heat and prevent brake fade

Organic vs. Ceramic vs. Semi-Metallic - What Is The Difference?

A common question many drivers have when shopping for brake pads is “What is the difference between the different brake pad materials?” While all brake pads will stop your vehicle, there are pros and cons of each pad material:

Brake Pad Material Cost Dust Level Noise Level Stopping Power Pad Life

Organic
$

Semi-Metallic
$$

Ceramic
$$$

Installation Tips

Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose

Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads

Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads

Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow

After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function

Helpful Tools: Allen Wrench | Brake Bleeder Kit | Brake Bleeder Wrench | Brake Cleaner | Brake Fluid Tester | Breaker Bar | Socket Set | Torque Wrench
Videos

Product Highlight: DFC 3000 Ceramic Pads

Attention California Customers - This product contains Antimony Oxide and other chemicals which is known in the State of California to cause cancer ( or reproductive problems).

Alternate/OEM Part Number(s)

{Alternate Inventory Numbers: 4000-0692-00}

Warranty Information

DYNAMIC FRICTION Warranty Information:12 months/12,000 miles

CAPA CERTIFIED or NSF CERTIFIED

CAPA Certified or NSF Certified parts bear the seal of independent, third party organizations guaranteeing fitment and quality equal to original equipment. These parts may be required if your insurance company is paying for the repair.

Specifications
Mounting Hardware Included	No
Pad Wear Sensor Included	No
FMSI Number	7737-D763
Friction Material Attachment	Integrally Molded
Inner Pad Height	1.772 IN
Inner Pad Overall Thickness	0.626 IN
Inner Pad Width	4.85 IN
Outer Pad Height	1.772 IN
Outer Pad Overall Thickness	0.626 IN
Outer Pad Width	4.85 IN
Pad Wear Sensor Type	Electronic
Prepared For Pad Wear Sensor	Yes

Brake Pad Material	Cost	Dust Level	Noise Level	Stopping Power	Pad Life
Organic	$
Semi-Metallic	$$
Ceramic	$$$