CENTRIC 10406811

Quantity:

Brand: CENTRIC

SKU:{{ product.sku }}

Part Number: {{ product.model }}

Features & Benefits:

Stable friction performance across a wide temperature range

100% shimmed to eliminate noise and vibration

Scorched for easy bed-in

Copper-free friction formulas provide high initial bite

Positive Molded for even wear characteristics

Hardware included, where applicable

Organic vs. Ceramic vs. Semi-Metallic - What Is The Difference?

A common question many drivers have when shopping for brake pads is “What is the difference between the different brake pad materials?” While all brake pads will stop your vehicle, there are pros and cons of each pad material:

Brake Pad Material Cost Dust Level Noise Level Stopping Power Pad Life

Organic
$

Semi-Metallic
$$

Ceramic
$$$

Installation Tips

Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose

Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads

Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads

Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow

After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function

Helpful Tools: Allen Wrench | Brake Bleeder Kit | Brake Bleeder Wrench | Brake Cleaner | Brake Fluid Tester | Breaker Bar | Socket Set | Torque Wrench

Attention California Customers - https://www.p65warnings.ca.gov/

Attention California Customers - WARNING: Cancer and Reproductive Harm

Alternate/OEM Part Number(s)

{Alternate Inventory Numbers: 104.06811}

Warranty Information

CENTRIC Warranty Information:90 days/3,000 miles

CAPA CERTIFIED or NSF CERTIFIED

CAPA Certified or NSF Certified parts bear the seal of independent, third party organizations guaranteeing fitment and quality equal to original equipment. These parts may be required if your insurance company is paying for the repair.

Specifications
Friction Material Composition	Semi-Metallic
Mounting Hardware Included	Yes
Pad Shims Included	Yes
Pad Wear Sensor Included	No
Friction Material Bonding Type	Integrally Molded
Prepared For Pad Wear Sensor	Yes
Pad Quantity	4
Inner Pad Height (IN)	2.894
Inner Pad Height (MM)	73.500
Inner Pad Width (IN)	6.157
Inner Pad Width (MM)	156.400
Outer Pad Height (IN)	2.894
Outer Pad Height (MM)	73.500
Outer Pad Width (IN)	6.157
Outer Pad Width (MM)	156.400